Forrest Saw Blades for EVERY Application

Wood Applications

Woodworker II

Woodworker I

Chop Master

For Rips
and Cross Cuts

For Cross
Cutting

For Mitering
and Cross Cutting

  30 teeth (rip 1-1/2” + hards)
  40 teeth (all other woods)
  20° hook

  60 teeth
  5° hook

  40, 60, 80, or 100 teeth
  -5° hook

For table, circular,
and panel saws

For all saw machines

For all chop, sliding
compound miter,
and radial arm saws

• Rated excellent for both rips and crosscuts on all hard and softwoods
• Leaves a smooth-as-sanded surface
• No bottom splintering
• Thin kerf option

• Delivers scratch-free, polished cuts every time
• Superior cross cutting of hardwood, softwood, and plywood veneer
• No splintering or fuzz
• Thin kerf

• Produces tight, perfectly cut miter joints
• No bottom splinters
• Cut smoothly at any angle
• Suitable for all types of wood

Advanced Woodworking

Custom Woodworker II

Miter Master

Dado King

Unique Options
for Complex
Requirements

For the Ultimate
Miter Cuts

Excellent Dado
Groove in All
Materials

  20 teeth (fast feed rip)
  40 teeth (choice of profile)
  20° hook

  80 or 100 teeth
  0° hook

  6”, 8”, 10”
  or 12” diameters
  -10° hook

For the advanced
table saw operator

For single or double
chop saws, table,
 and radial arm saws

World’s finest
multi-tooth set

• A specialty blade offering expanded saw capabilities
• Ideal for joinery and special applications
• Grind selection available for box joints, dovetails, flat bottom grooves, and high feed rates
• Ultra thin 5/64” kerf option

• Produces precise
  45° cuts
• Delivers perfect 90° joints with no gaps
• Ideal for picture frames, window frames and blinds, toe notching, and fine millwork
• ATBR - wood, ATB
  - geso and wood/
  aluminum, TCG -
  aluminum and PVC

• Produces 1/4”
  to 29/32” flat-
  bottomed grooves
• No splintering with and across grain
• Includes six 4-
  tooth chippers,
  two 24-tooth
  outside blades,
  and shims
• For soft and hard-
  wood, oak ply
  veneer, or melamine

Wood & Man-Made Materials

Duraline

Duraline Hi-AT

Thin Rim

For Laminates,
Acrylics, Wood,
and More

For Two-sided
Laminates and
Veneers

For Fragile
Materials 1/32”
to 1/4” Thick

  40, 60, 80, or 100 teeth
  5° hook

  60, 80 or 100 teeth
  5° hook

  80 teeth
  5° hook
  built in stiff hub

Various
combinations for
all applications

Best Blade for low
pressure laminates

Extra thin 5/64” kerf
for thin-walled materials

• Use the #2 TCG
  and 80T for
  laminated
  flooring and cast
  acrylic sheet
• Use ATB and 60T
  for general wood
  cutting
• Use #11 TCG
  for two-sided
  Formica® and
  high pressure
  laminate board

• No splintering or
  chip-out on top or
  bottom surfaces
• For flawless cuts
• No scoring blade
  needed
• High tooth count
  ideal for melamine
  and birch/oak ply
• Top quality for long
  life and vibration-
  free performance
• Thin kerf option

• Perfect for delicate
  acrylic sheets, plastic
  extrusions, and
  thin wood veneers
• Ideal on Formica®
  overlay, engraving
  stock, and chippy
  material
• Eliminates chipping
  by minimizing
  tooth impact
• ATB - wood
  TCG - plastic

Man-Made Materials Concave Face No-Melt Solid Surface Planer Nonferrous Blade For Foam Core Molding and Flakeboard For Plastic Sheets and Extrusions For Countertops and Solid Surface Material For Copper Brass, and Aluminum   48, 50 or 60 teeth   10° hook   unique curved face   60, 80 or 100 teeth   5° hook   40, 50 or 60 teeth   20° hook (table saws)   10° hook (overhead saws)   60 teeth (1/4”-3/4” thick)   80 teeth (3/16” or less)   -5° hook For all saw machines Cuts melt-prone material cleanly and easily For both conventional cut (i.e. table saw) and climb cut (i.e. radial arm saw) Excellent results on table, radial arm, or chop saws Delivers chip-less cuts on both sides of board Won’t melt delicate polystyrene molding Available in standard and metric sizes Does excellent job on extruded profiles Delivers clean cuts on stacked sheets No “welding,” no chipping Unique tooth style and side clearances produce cool, melt-free cuts Super-smooth cutting of solid surfaces Chip-free cutting without scratches Reduces finishing time dramatically Easy feeding tooth design Standard and metric sizes Precise burr- free cutting Tooth counts for light and heavy wall tubes, extrusions and plates Use oil or wax lubricants