Saw Blades OSHLUN SAW BLADES Aluminum & Non Ferrous Oshlun 7-1/4"x40T TCG, 5/8" Hole (with Diamond Knockout) for Aluminum & Nonferrous Metals
Oshlun nonferrous blades have been designed with a negative hook angle, triple chip tooth grind, and precision ground micro grain carbide tips. The specially formulated tungsten carbide lasts longer than other carbide grades and leaves burr free cuts in all types of nonferrous metals, such as: aluminum, copper, brass, bronze, and even most plastics. The 10” and larger feature copper plugged expansion slots for reduced noise and vibration while several of the smaller diameter blades feature laser cut expansion slots and heat vents for cooler operation.
WARNING: Never attempt to cut steel or ferrous metals with these blades. It is highly recommended that you use a liquid lubricant or coolant like WD-40 when cutting nonferrous metals. Proper clamping devices should be employed.
WARNING: Never attempt to cut steel or ferrous metals with these blades. It is highly recommended that you use a liquid lubricant or coolant like WD-40 when cutting nonferrous metals. Proper clamping devices should be employed.
*Has 5/8" bore with Diamond Knockout.
- Professional grade C-1 carbide
- Negative hook angle
- Triple chip tooth grind
- Precision ground carbide tips
- Copper plugged expansion slots
WARNING: Never attempt to cut steel or ferrous metals with these blades. It is highly recommended that you use a liquid lubricant or coolant like WD-40 when cutting nonferrous metals. Proper clamping devices should be employed.
Three $5.00 OFF Sharpening Coupons Included with purchase.
Need help picking the correct Forrest Saw Blade or accessory?
See our Application Chart, or Contact Us for expert advice
See our Application Chart, or Contact Us for expert advice