Oscillating Tool Blades OSHLUN Oscillating Tool Blades Quick-Fit Mount System Oshlun 2-1/3-Inch Diamond Sickle Blade with Quick-Fit Arbor for Standard and Quick Change Tools, 1-Pack
OSHLUN's new Quick-Fit mount system is even more universal with an open back which allows the blades to fit nearly all standard and quick change oscillating tools.
- Uni-Fit Compatible Tools
- Dremel® Multi-Max™ MM40, MM45 (Quick-Lock™ Version)
- DeWalt® DWE315K® or DCS355D1®
- Most Quick-Change Tools
- Porter-Cable® PC250MTK® or PCE605K®
- Rockwell® Sonicrafter® X2
Notes: The Quick-Fit mount is not compatible with FEIN® SuperCut® or original Rockwell® Sonicrafter® Hex tool unless using the OEM adapter (see note below for adapter information). Specific blades designed for these tools are also available under the MMR or MMS prefix.
ADAPTER INFORMATION: Uni-Fit and Quick-Fit blades can only be used on the FEIN® SuperCut® or original Rockwell® Sonicrafter® Hex tool if using and OEM adapter (not sold by Oshlun):
- Rockwell® Sonicrafter® Adapter #RW9190
- FEIN® SuperCut® Adapter #3-06-05-114-01-1
- Compatible with most Standard and Quick Change Oscillating Tools
- Premium Diamond
- Designed for removing hard grout and tile adhesive
- Quick-Fit Mount System
Oshlun oscillating tool blades are the best value on the market with similar blades selling for 2 or even 3 times more. The diamond sickle blade is great for removing hard grout from ceramic tile. The premium diamond material ensures a long blade life, even in concrete and brick. The Quick-Fit mount system fits nearly all standard and quick change oscillating tools including FEIN MultiMaster, Bosch Multi-X, Craftsman NEXTEC, DeWalt DWE315K, DCS355D1, Dremel Multi-Max MM20, MM30, 6300, 8300 Cordless, MM40 and MM45 (Quick-Lock™ Versions), Makita TM3000CX5, LXMT025, LXMT02Z, Milwaukee M12, Porter-Cable PC250MTK or PCE605K, Ridgid JobMax, Rockwell Sonicrafter X2, Skil Multi-Tasker and Oscillating Tools with 3/8” round arbors.
IMPORTANT: A spacer is required to use the MMC Series Quick-Fit Mount System blades on Bosch and Dremel tool-free machines. If a spacer is required for use on your machine contact Oshlun by phone at 702-294-1231 to request one at no charge. This spacer is not included with the blade package and is only required on these two brands of machine!
The Quick-Fit mount is not compatible with FEIN SuperCut or original Rockwell Sonicrafter Hex tools. All trademarks and tradenames are property of their respective owners. Sold as 1 pack.
Three $5.00 OFF Sharpening Coupons Included with purchase.
See our Application Chart, or Contact Us for expert advice
