Saw Blades FORREST SAW BLADES Miter & Radial Arm Saw Chopmaster Oshlun Miter and Portable Saw Laser Guide

Chopmaster CHOPMASTER saw blades are designed for chop saws, sliding compound, and radial arm saws.

These top-quality blades produce tight, perfectly cut miter joints, and cross cuts with no bottom splinters.
  • Made with double-hard C-4 Submicron Carbide for up to 300% longer life
  • A heavier than normal steel plate maintains maximum stability for the best cut
  • A negative face hook also adds to optimum rigidity when cutting
  • Each blade is hand-straightened to a runout of .001/.002 for maximum cut quality
  • The tooth style selected (4 points and a flat) maximizes steady, clean cuts with no bottom splintering
  • Grabbing and throwing of scrap cut-offs has been minimized by our design
  • You will be surprised by the extra-smooth, tight cuts you will get with this blade
MOST CHOPMASTERS ARE IN STOCK FOR QUICK SHIPMENT
Oshlun Miter and Portable Saw Laser Guide
Oshlun Miter and Portable Saw Laser Guide
Model:
LG-M01
Price:
$24.99
Free Ground Shipping on Orders over $49!
- Fits most 7-1/4, 8, 8-1/4, 10, and 12-Inch Miter, sliding compound miter, chop, and portable saws
- New recessed laser design to protect the laser from hitting the material on deep cuts
- New thinner design to fit more saws
- New brighter and more accurate laser line
- Includes extra set of silver oxide batteries

Notes: Will not fit some 12" saw models that have interlocking arbor flanges, including Ridgid and ProTech or Hitachi 12" Machines. If your saw has a 5/8" threaded arbor shaft and uses a nut to secure the blade, use model #LG-R01.

Item # LG-M01 Installation Note: The arbor recess on the laser guide is made to fit many machines and may have some amount of play when mounted. To address the universal arbor recess, when installing the laser guide, once it is placed on the arbor you can rotate it slightly which will allow the laser guide to self-center on the end of the arbor shaft prior to tightening down.

In some cases such as 12" machines and those with metric arbor sizes, the blade adapter or inside arbor flange washer can protrude past the blade body preventing the laser guide from tightening down fully on the blade. Often this compatibility issue can be overcome by utilizing a full kerf blade, or if needed, a thinner blade adapter on your machine.

Warning: Read and follow all instructions that came with your saw. Never look directly into the laser beam. Do not use if the laser guide does not secure the blade properly.

SHIPS FREE IF PURCHASED WITH OTHER ITEMS THAT ARE ELIGIBLE FOR FREE SHIPPING
Oshlun Miter and Portable Saw Laser Guide

LG-M01

  • Click to Load this Photo
  • Click to Load this Photo
  • Click to Load this Photo
Need help picking the correct Forrest Saw Blade or accessory?
See our Application Chart, or Contact Us for expert advice
Slivers
Mill
PREMIUM SAW BLADES and Industrial Cutting Tools