Saw Blades FORREST SAW BLADES Miter & Radial Arm Saw Miter Master Oshlun Miter and Portable Saw Laser Guide

Miter Master MITER MASTER saw blades are designed for double or single Miter Saws.

  • These professional quality miter saw blades product tight, perfectly cut miter joints with no bottom splinters
  • Forrest Miter Master blades work with all makes of double or single miter saws

Tooth Style Recommendations:

  • #6 - for precision cutting of picture frames,cabinet and furniture parts
  • #2 - for cutting copper and brass and aluminum extrusions
    Specially designed to cut extruded profiles, bars, and plate stock. Triple chip (#2) tooth style, 5 negative face rake, and shallow taper side grind produce smooth sawn edges, minimizing or eliminating burr. MUST be used with cutting lubricant. Clamp the piece being cut to avoid kickbacks.
  • #7 - for aluminum clad wooden window and door parts
Oshlun Miter and Portable Saw Laser Guide
Oshlun Miter and Portable Saw Laser Guide
Free Ground Shipping on Orders over $49!
- Fits most 7-1/4, 8, 8-1/4, 10, and 12-Inch Miter, sliding compound miter, chop, and portable saws
- New recessed laser design to protect the laser from hitting the material on deep cuts
- New thinner design to fit more saws
- New brighter and more accurate laser line
- Includes extra set of silver oxide batteries

Notes: Will not fit some 12" saw models that have interlocking arbor flanges, including Ridgid and ProTech or Hitachi 12" Machines. If your saw has a 5/8" threaded arbor shaft and uses a nut to secure the blade, use model #LG-R01.

Item # LG-M01 Installation Note: The arbor recess on the laser guide is made to fit many machines and may have some amount of play when mounted. To address the universal arbor recess, when installing the laser guide, once it is placed on the arbor you can rotate it slightly which will allow the laser guide to self-center on the end of the arbor shaft prior to tightening down.

In some cases such as 12" machines and those with metric arbor sizes, the blade adapter or inside arbor flange washer can protrude past the blade body preventing the laser guide from tightening down fully on the blade. Often this compatibility issue can be overcome by utilizing a full kerf blade, or if needed, a thinner blade adapter on your machine.

Warning: Read and follow all instructions that came with your saw. Never look directly into the laser beam. Do not use if the laser guide does not secure the blade properly.

Oshlun Miter and Portable Saw Laser Guide


  • Click to Load this Photo
  • Click to Load this Photo
  • Click to Load this Photo
Need help picking the correct Forrest Saw Blade or accessory?
See our Application Chart, or Contact Us for expert advice
PREMIUM SAW BLADES and Industrial Cutting Tools