ULTRA-PLANER woodcutting saw blades are specially tipped with extra durable super abrasive-resistant C-4 carbide. These blades are not mass-produced but custom made, hand-straightened and hand-polished for a precision cut.

The ULTRA-PLANER carbide-tipped saw blade is specially designed for ripping hard and soft woods in those applications where the “ultimate” smooth cut is required.

For hardwoods (oak, birch, hard maple, cherry or walnut), use 30 tooth blades.
For softwoods (basswood, pine, soft maple, balsam or redwood) use 40 tooth blades.

Why the ULTRA-PLANER?

– Specially engineered clearances on the carbide teeth minimize and in many cases totally eliminate side scoring. The result…little or no planing/joining or sanding! Thicker, heavier plate for rigidity and less run out.
– 50% – 300% longer life between sharpenings
– Reduced yearly sharpening costs
– Less machine downtime
– Improved labor efficiency
– Inventory savings – fewer blades required

The design of the ULTRA-PLANER saw blade includes a specially modified alternate top bevel (#7 Modified) tooth style. This design allows for a very rapid feeding of both hardwoods and softwoods with exceptional smoothness.

Note: For power feed operations, {contact_us} and specify your interest in the Triple Chip Tooth Style or Alternate Top Bevel with Raker tooth (ATBR)- which is available by special order.

Note: For best results, the ULTRA-PLANER saw blade is recommended to be used with stiffener plates 1/2 to 2/3 of the blade diameter mounted on one or both sides of the blade body.