Micro-Jig Products MJ Splitter Kits Micro Jig MJ SPLITTER 1/8-Inch Kit (Green)
Table saw splitter safety is easy with MicroJig's award-winning splitters. Their patented design makes them simple to install and simple to align. Remove and Remount in 2 seconds and you're ready to go.
The MJ Splitter is designed to be an affordable alternative that will dramatically increase your table saw safety. It’s simple to use design makes it easier than ever to achieve optimal safety on the table saw. No more excuses. Get safe.
Choose from the basic MJ Splitter or the MJ Splitter SteelPro. Both are simple to align. Just “Plug n’ Play.” Available in 1/8 inch kerf or thin kerf styles. We offer extra inserts for the basic kits.
Use with Leecraft Zero-Clearance inserts for optimum use. Not intended for inserts that feature a riving knife slot.
It has come to our attention that MicroJig does not recommend using their Splitter Kits with Leecraft Phenolic Zero Clearance inserts. Please read below a statement from Leecraft addressing that problem:
1. Leecraft phenolic Zero Clearance Inserts are totally compatible, and work beautifully, with the MJ splitters. The MJ splitter is a very high tolerance product, and will only work properly if mounted in accurately located and machined mounting holes, which of course the customer must produce himself. Microjig includes an economy-grade drill bit in the kit, which is adequate for softer insert materials like wood and most plastics used for inserts. These bits will quickly dull in phenolic, especially when using a hand held drill. The combination of a dull bit and the inherent inaccuracies of hand drilling, often result in poorly machined mounting holes, which defeat the precision nature of the splitter.
To use MJ splitters with Leecraft inserts: You must use a 3/16" diameter HIGH SPEED STEEL (HSS) drill bit and drill press, to precisely and carefully drill the 2 mounting holes, after they are located and "spotted" with the HSS drill bit in a hand drill, using the special drill fixture. Make sure you clear the chips often (peck drill) to prevent heat build up. HSS drill bits are the ones most commonly sold by tool retailers nowadays. Look for "HSS" on the shank.
2. There should be no issues as far as the 2" space requirement, and you can easily confirm this on your particular saw. With your standard factory insert in place, simply raise blade to full elevation and measure the distance from the back end of the blade to the end of the insert. This space will be no different on your ZCI.
Should you have any other questions or concerns please don't hesitate to contact us at (716)685-4458 or email: firstname.lastname@example.org
For decades, the wood worker has been operating their table saw without a splitter. We understand that stock splitters are clumsy, cumbersome, and, most of all, difficult to reinstall and realign. We also know that after-market splitters can get quite pricey. Of course, you are taking a great risk each time you make a cut without a splitter. Kick back is always a looming danger and accidents happen.
With the MJ Splitter, there are no more excuses for not having a splitter on your table saw. The MJ Splitter is designed to be an affordable alternative that will dramatically increase your table saw safety. It’s simple to use design makes it easier then ever to achieve optimal safety on the table saw. No more excuses. Get safe.
Great to use with Leecraft Zero-Clearance inserts.
Three $5.00 OFF Sharpening Coupons Included with purchase.