Saw Blades FORREST SAW BLADES Combination Rip & Cross Cut Woodworker II

Woodworker II WOODWORKER II saw blades are designed for table saws.

With this one all-purpose blade, you can rip and crosscut 1" - 2" rockhards and softwoods resulting in a smooth-as-sand surface. Ply-veneers of oak and birch will crosscut with NO BOTTOM SPLINTER at moderate feed rates.

Features of the WOODWORKER II saw blade:
  • 20° face hook for easy feed
  • Double-hard and 40% stronger C-4 carbide will give up to 300% longer life between sharpenings
  • Ends blade changing (one blade does rip, combo and crosscut)
  • Ends scratchy saw cuts
  • Ends second-step finishing
  • Ends cutting 1/16" oversize to allow for resurfacing
  • Buy and Sharpen ONE blade instead of 3: (24T Rip, 50T Combination, 80T Crosscut)
  • Use 30T version if ripping mostly 2" - 3" thick hardwoods
  • Side wobble is held to .001" - with other brands .004/.010 is common!
  • RAISE the blade for THICK woods. LOWER the blade for THIN woods and get perfect cuts every time
  • Specially engineered clearances on the carbide teeth can totally eliminate side scoring. The result.. .no planing/jointing or sanding. In many cases a glue-line cut can be obtained, depending on the accuracy of the saw machine
  • Optional thin-kerf 3/32" width blades are available in 10" diameter for EASIER CUTTING with minimum power saw machines. They also remove 25% less material
MOST WOODWORKER II's ARE IN STOCK FOR QUICK SHIPMENT!

Slivers
Mill
PREMIUM SAW BLADES and Industrial Cutting Tools