Saw Blades OSHLUN SAW BLADES Steel & Ferrous OSHLUN Steel & Ferrous Metal Cutting, 5-7/8-Inch 32 Tooth MTCG Saw Blade with 20mm Arbor (5/8-Inch Bushing)

Steel & Ferrous

Made by OSHLUN

FEATURES

  • Professional Grade C-6 Carbide
  • Laser Cut Expansion Slots
  • Triple Chip Grind
  • Precision Ground Carbide Tips
  • Tensioned & Hardened Steel Plate
  • Surface Ground Steel Plate

These ferrous blades have been designed with a durable C-6 carbide grade and triple chip tooth grind to ensure a long cutting life in ferrous metals, such as: steel studs, angle iron, pipe, rebar, channel, flat stock, conduit, and much more. They can also be used for cutting non ferrous metals, such as: aluminum, copper, and brass. The specially formulated micro grain carbide tips with titanium and tantalum last longer and leave a burr free cut with little to no sparks or dust, commonly associated with abrasives. They also cut 5 to 10 times faster and last up to 30 times longer than abrasives, allowing fewer blade changes and increased production. 

 

Notes: Blades with more teeth are generally better suited for thinner material, while those with less teeth are better suited for thicker material. Item's SBF-054050 and SBF-072568 have been designed for very thin stock and sheet metal.

 



OSHLUN Steel & Ferrous Metal Cutting, 5-7/8-Inch 32 Tooth MTCG Saw Blade with 20mm Arbor (5/8-Inch Bushing)
OSHLUN Steel & Ferrous Metal Cutting, 5-7/8-Inch 32 Tooth MTCG Saw Blade with 20mm Arbor (5/8-Inch Bushing)
Model:
SBF-059032
Diameter:
5-7/8"
Bore:
20mm
Price:
$22.99
Teeth:
32
Free Ground Shipping on Orders over $49!

#SBF-059032 5-7/8-Inch 32 Tooth MTCG Saw Blade with 20mm Arbor (5/8-Inch Bushing) for Mild Steel and Ferrous Metals.  Maximum RPM 4,680.

WARNING: Not recommended for cutting hardened materials or stainless steel. Never use on saws that run above the rated MAX RPM. Proper clamping devices should be employed. Follow all safety instructions provided with your saw.

Oshlun's ferrous metal blades have been designed with a durable carbide grade and special tooth grind which ensures an extended cutting life of all types of ferrous metals and mild steel such as steel studs, angle iron, pipe, rebar, channel, flat stock and more. They can also be used for cutting non ferrous metals such as aluminum, copper and brass. The specially formulated C-6 micro grain carbide with titanium lasts longer and leaves a burr free cut with little to no sparks or dust, which are common when using abrasives. They can cut 5 to 10 times faster and last up to 30 times longer than abrasives, allowing fewer blade changes and increased production. The higher tooth count blades are better suited for thinner materials, while the lower tooth count blades are better for thicker materials. WARNING: Not recommended for cutting hardened materials. Never use on saws that run above the rated Maximum RPM. Proper clamping devices should be employed. All trademarks and tradenames are property of their respective owners.

  • Fits Makita LXT
  • Max RPM: 4,680
  • Professional Grade C-6 Carbide
  • Modified Triple Chip Tooth Grind
  • Positive Hook Angle.

Three $5.00 OFF Sharpening Coupons Included with purchase.

 

OSHLUN Steel & Ferrous Metal Cutting, 5-7/8-Inch 32 Tooth MTCG Saw Blade with 20mm Arbor (5/8-Inch Bushing)

SBF-059032

  • Click to Load this Photo
  • Click to Load this Photo
Need help picking the correct Forrest Saw Blade or accessory?
See our Application Chart, or Contact Us for expert advice
Slivers
Mill
PREMIUM SAW BLADES and Industrial Cutting Tools