8-Inch Bushing) for Aluminum and Non Ferrous Metals

Oshlun nonferrous blades have been designed with a negative hook angle, triple chip tooth grind, and precision ground micro grain carbide tips. The specially formulated tungsten carbide lasts longer than other carbide grades and leaves burr free cuts in all types of nonferrous metals, such as: aluminum, copper, brass, bronze, and even most plastics. The 10” and larger feature copper plugged expansion slots for reduced noise and vibration while several of the smaller diameter blades feature laser cut expansion slots and heat vents for cooler operation.

WARNING: Never attempt to cut steel or ferrous metals with these blades. It is highly recommended that you use a liquid lubricant or coolant like WD-40 when cutting nonferrous metals. Proper clamping devices should be employed.

Oshlun 5-7/8-Inch 52 Tooth ATB Saw Blade with 20mm Arbor (5/8-Inch Bushing) for Aluminum and Non Ferrous Metals

Model:

SBNF-059052

Diameter:

5-7/8"

Bore:

20mm

Kerf:

.063"

Price:

$21.95

Teeth:

Tooth Style:

ATB

Free Ground Shipping on Orders over $49!

Oshlun's non ferrous metal blades have been designed with precision ground micro grain tungsten carbide tips. The specially formulated carbide lasts longer and leaves clean, burr free cuts in all types of non ferrous metals such as aluminum, copper, brass, bronze and even some plastics.

WARNING: Never attempt to cut ferrous metals with these blades. It is recommended that you use a coolant when cutting non ferrous metals. Proper clamping devices should be employed.

Fits: Makita LXT
Max RPM: 4,680
Professional Grade C-1 Carbide
Alternate Top Bevel Tooth Grind
Zero Degree Hook Angle

Three $5.00 OFF Sharpening Coupons Included with purchase.

SBNF-054050

Need help picking the correct Forrest Saw Blade or accessory?
See our Application Chart, or Contact Us for expert advice