Saw Blades FORREST SAW BLADES Dado King Sets Forrest 6"x24T Dado King Set with 30mm Hole & 2-9mm Pinholes w/case for Felder/Hammer Saws

Dado King Sets

DADO KING Dado Sets have no equal! The 24 C-4 carbide tips on each trim saw are twice as many as most competitors, and the 4 C-4 carbide tips on each chipper are also twice as many as most competitors.

"Forrest Manufacturing Co. makes the only dado set with a negative hook on all its teeth, including chippers. This effectively makes the teeth cut 'up' into the wood, even when used on a tablesaw. It was the only set that cut the oak-veneered plywood without tearout and it also gave a perfectly flat bottom with a discreet little scribe"
-Jim Puterbaugh
See Fine Woodworking, July/August, 1991, p. 59


"...ruled in nearly every category of our tests"
Better Homes and Gardens, September, 2003, p. 94


Advantages of the DADO KING:

    • No splintering - cross-cutting oak, ply veneers and melamine
    • Perfect flat-bottom grooves - not staggered steps or round bottoms like a wobble-dado leaves!
    • Cuts in all directions - rip, cross-cut, miter, any depth
    • Cuts all sized grooves - 1/4" through 29/32" increments
      (Set of magnetic adjusting shims also included)
    • Super-hard carbide - gives up to 300% longer life, especially on plywoods and abrasive particle boards
    • FORREST DADO KING SETS INCLUDE (with the exception of #DK0824316):
    • Blade runner plastic carrying case (except 12" size and DK0824316)
    • Two 24 tooth, carbide-tipped trim saw blades.
    • Four 1/8" kerf, 4 tooth chippers.
    • One 1/16" kerf, 4 tooth chipper.
    • One 3/32" kerf, 4 tooth chipper.
    • Two each of .010, .012, .015 magnetic shims.
  

 

DADO-KING SETS ARE IN STOCK FOR QUICK SHIPMENT!

Forrest 6"x24T Dado King Set with 30mm Hole & 2-9mm Pinholes w/case for Felder/Hammer Saws
Forrest 6"x24T Dado King Set with 30mm Hole & 2-9mm Pinholes w/case for Felder/Hammer Saws
Model:
DK06244F
Diameter:
6"
Bore:
30mm
Price:
$357.75
Free Ground Shipping on Orders over $49!
The 6 inch DK06244F is used with the Felder 500 series and
Hammer (also applies to older 700 machines mid '07 and prior).


Three $5.00 OFF Sharpening Coupons Included with purchase.
Forrest 6"x24T Dado King Set with 30mm Hole & 2-9mm Pinholes w/case for Felder/Hammer Saws

 

  • Click to Load this Photo
  • Click to Load this Photo
  • Click to Load this Photo
  • Click to Load this Photo
Need help picking the correct Forrest Saw Blade or accessory?
See our Application Chart, or Contact Us for expert advice
Slivers
Mill
PREMIUM SAW BLADES and Industrial Cutting Tools