Saw Blades FORREST SAW BLADES Miter & Radial Arm Saw Chopmaster Signature Line Oshlun Miter and Portable Saw Laser Guide

Chopmaster Signature Line


Forrest has designed the BEST Precision Trim Blade ever for sliding compound miter/chop saws. Manufactured with more teeth and hi-tech, proprietary tooth design for a quieter cut with even better splinter control. The alternate shear face design is superior for precise cutting of delicate pre-finished crown moulding, picture frame moulding and composite moulding.

  • Specially designed for chop, sliding compound miter saws and radial arm saws.
  • Made with double-hard C-4 Submicron Carbide for up to 300% longer life. A heavier than normal steel plate maintains maximum stability for the best cut. A negative face hook also adds to optimum rigidity when cutting. ATBR teeth diagram.
  • Each blade is hand-straightened to a runout of .001/.002 for maximum cut quality. The tooth style selected (4 points and flat) maximizes steady, clean cuts with no bottom splintering. Grabbing and throwing of scrap cut-offs has been minimized by our design. You will be surprised by the extra-smooth, tight miter cuts you will get with this blade.
Oshlun Miter and Portable Saw Laser Guide
Oshlun Miter and Portable Saw Laser Guide
Free Ground Shipping on Orders over $49!
- Fits most 7-1/4, 8, 8-1/4, 10, and 12-Inch Miter, sliding compound miter, chop, and portable saws
- New recessed laser design to protect the laser from hitting the material on deep cuts
- New thinner design to fit more saws
- New brighter and more accurate laser line
- Includes extra set of silver oxide batteries

Notes: Will not fit some 12" saw models that have interlocking arbor flanges, including Ridgid and ProTech or Hitachi 12" Machines. If your saw has a 5/8" threaded arbor shaft and uses a nut to secure the blade, use model #LG-R01.

Item # LG-M01 Installation Note: The arbor recess on the laser guide is made to fit many machines and may have some amount of play when mounted. To address the universal arbor recess, when installing the laser guide, once it is placed on the arbor you can rotate it slightly which will allow the laser guide to self-center on the end of the arbor shaft prior to tightening down.

In some cases such as 12" machines and those with metric arbor sizes, the blade adapter or inside arbor flange washer can protrude past the blade body preventing the laser guide from tightening down fully on the blade. Often this compatibility issue can be overcome by utilizing a full kerf blade, or if needed, a thinner blade adapter on your machine.

Warning: Read and follow all instructions that came with your saw. Never look directly into the laser beam. Do not use if the laser guide does not secure the blade properly.

Oshlun Miter and Portable Saw Laser Guide


  • Click to Load this Photo
  • Click to Load this Photo
  • Click to Load this Photo
Need help picking the correct Forrest Saw Blade or accessory?
See our Application Chart, or Contact Us for expert advice
PREMIUM SAW BLADES and Industrial Cutting Tools